http://WWW.SHAIKH-PETROLEUM.COM
SHAIKHPETROLEUM 59ba728ff39fac0a1ce8231f False 176 9
OK
background image not found
Found Update results for
'high viscosity grade'
9
Furnace Oil Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil & Furnace Oil C9 C10 & MTO. Brief About Products: Light Diesel Oil Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha. Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates. SPECIFICATION Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. VISCOSITY Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. SAFETY INFORMATION Reactivity Data – Chemically stable and incompatible with strong oxidizers. Does not React vigorously with common materials but can react with oxidizing agents Health Hazard Data – Routes of entry may be through inhalation/ ingestion/ skin/ eye. EFFECTS OF EXPOSURE / SYMPTOMS Ingestion – may cause spontaneous vomiting, irritation of mouth throat and gastro intestinal tract. On prolonged exposure it makes skin dry, erythema oil acne, development of warty growths which may lead to skin cancer, skin cracking and contact dermitites. As it is handled at a high temperature, skin contact could produce burns. On exposure to eye it may cause light to moderate irritation. Ingested – do not induce vomiting as it may lead to chemical pneumonitis. Remove contaminated clothing immediately and wash affected area with water and soap. If eyes are affected, irrigate liberally with copious amounts of water and seek medical advice. Furnace Oil in Surat Furnace Oil Ahmadabad Furnace Oil in Rajkot Furnace Oil in Bhavnagar Furnace Oil in Ankleshwar Furnace Oil Oil in Jamnagar Furnace Oil in Junagadh Furnace Oil in Kutch Furnace Oil Kheda Furnace Oil in Gandhinagar Furnace Oil in Anand Furnace Oil in Morbi Furnace Oil in Mehsana Furnace Oil in Surendranagar Furnace Oil in Bharuch Furnace Oil in Valsad Furnace Oil in Navsari Furnace Oil in Gir Somnath Furnace Oil in Porbandar Furnace Oil in Panchmahal Furnace Oil in Dahod Furnace Oil in Valsad Furnace Oil in Amreli Furnace Oil SHAIKH PETROLEUM is Gujarat's largest manufacturing company into Furnace Oil. We are leading supplier of Furnace Oil in Gujarat, India. Furnace Oil.
Furnace Oil Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil & Furnace Oil C9 C10 & MTO. Brief About Products: Light Diesel Oil Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha. Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates. SPECIFICATION Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. VISCOSITY Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. SAFETY INFORMATION Reactivity Data – Chemically stable and incompatible with strong oxidizers. Does not React vigorously with common materials but can react with oxidizing agents Health Hazard Data – Routes of entry may be through inhalation/ ingestion/ skin/ eye. EFFECTS OF EXPOSURE / SYMPTOMS Ingestion – may cause spontaneous vomiting, irritation of mouth throat and gastro intestinal tract. On prolonged exposure it makes skin dry, erythema oil acne, development of warty growths which may lead to skin cancer, skin cracking and contact dermitites. As it is handled at a high temperature, skin contact could produce burns. On exposure to eye it may cause light to moderate irritation. Ingested – do not induce vomiting as it may lead to chemical pneumonitis. Remove contaminated clothing immediately and wash affected area with water and soap. If eyes are affected, irrigate liberally with copious amounts of water and seek medical advice. Furnace Oil in Surat Furnace Oil Ahmadabad Furnace Oil in Rajkot Furnace Oil in Bhavnagar Furnace Oil in Ankleshwar Furnace Oil Oil in Jamnagar Furnace Oil in Junagadh Furnace Oil in Kutch Furnace Oil Kheda Furnace Oil in Gandhinagar Furnace Oil in Anand Furnace Oil in Morbi Furnace Oil in Mehsana Furnace Oil in Surendranagar Furnace Oil in Bharuch Furnace Oil in Valsad Furnace Oil in Navsari Furnace Oil in Gir Somnath Furnace Oil in Porbandar Furnace Oil in Panchmahal Furnace Oil in Dahod Furnace Oil in Valsad Furnace Oil in Amreli Furnace Oil SHAIKH PETROLEUM is Gujarat's largest manufacturing company into Furnace Oil. We are leading supplier of Furnace Oil in Gujarat, India. Furnace Oil. For more info visit us at http://shaikh-petroleum.com/bizFloat/59e5916896b7120bac058a83/Furnace-Oil-Shaikh-Petroleum-was-established-in-the-year-1983-under-the-dynamic-leadership-of-Late-Mr-Gulambhai-Shaikh-SHAIKH-Petroleum-established-more-than-two-decades-ago-SHAIKH-PETROLEUM-is-one-of-the-rel
MTO MTO There are two grades of MTO viz. 145-2050C grade and 125-2400C grade. The numbers denote the boiling range. Production MTO is produced at Haldia, Koyali and Panipat Refineries of IOC. End Use MTO is mainly used as Raw Material for paints / varnishes. MTO is also used for dry cleaning and other industrial cleaning purposes. We are leading supplier of#MTO-in-Gujarat, We are leading supplier of#MTO-in-India For more info visit us at http://shaikh-petroleum.com/bizFloat/5a323a9f7e874b034c781763/MTO-MTO-There-are-two-grades-of-MTO-viz-145-2050C-grade-and-125-2400C-grade-The-numbers-denote-the-boiling-range-Production-MTO-is-produced-at-Haldia-Koyali-and-Panipat-Refineries-of-IOC-End-Use-MTO-is-mainly
MTO MTO There are two grades of MTO viz. 145-2050C grade and 125-2400C grade. The numbers denote the boiling range. Production MTO is produced at Haldia, Koyali and Panipat Refineries of IOC. End Use MTO is mainly used as Raw Material for paints / varnishes. MTO is also used for dry cleaning and other industrial cleaning purposes. We are leading supplier of#MTO-in-Gujarat, We are leading supplier of#MTO-in-India
Furnace Oil Furnace Oil Furnace oil is a dark viscous residual product used as a fuel in different types of combustion equipment. It conforms to IS:1593-1982 for fuel oils. Presently MV-2 grade (kinematic viscosity range of 125 to 180 CSt at 50°C) conforming to this specification is being marketed. We are leading supplier of#Furnace-Oil-in-Gujarat, We are leading supplier of#Furnace-Oil-in-India For more info visit us at http://shaikh-petroleum.com/bizFloat/5a3237e44da5e605101dbfa3/Furnace-Oil-Furnace-Oil-Furnace-oil-is-a-dark-viscous-residual-product-used-as-a-fuel-in-different-types-of-combustion-equipment-It-conforms-to-IS-1593-1982-for-fuel-oils-Presently-MV-2-grade-kinematic-viscos
Furnace Oil Furnace Oil Furnace oil is a dark viscous residual product used as a fuel in different types of combustion equipment. It conforms to IS:1593-1982 for fuel oils. Presently MV-2 grade (kinematic viscosity range of 125 to 180 CSt at 50°C) conforming to this specification is being marketed. We are leading supplier of#Furnace-Oil-in-Gujarat, For more info visit us at http://shaikh-petroleum.com/bizFloat/5a38e411b75ee00a74f099f5/Furnace-Oil-Furnace-Oil-Furnace-oil-is-a-dark-viscous-residual-product-used-as-a-fuel-in-different-types-of-combustion-equipment-It-conforms-to-IS-1593-1982-for-fuel-oils-Presently-MV-2-grade-kinematic-viscos
Furnace Oil Furnace Oil Furnace oil is a dark viscous residual product used as a fuel in different types of combustion equipment. It conforms to IS:1593-1982 for fuel oils. Presently MV-2 grade (kinematic viscosity range of 125 to 180 CSt at 50°C) conforming to this specification is being marketed. We are leading supplier of#Furnace-Oil-in-Gujarat, We are leading supplier of#Furnace-Oil-in-India
Furnace Oil Furnace Oil Furnace oil is a dark viscous residual product used as a fuel in different types of combustion equipment. It conforms to IS:1593-1982 for fuel oils. Presently MV-2 grade (kinematic viscosity range of 125 to 180 CSt at 50°C) conforming to this specification is being marketed. We are leading supplier of#Furnace-Oil-in-Gujarat,
Light Diesel Oil We are offering best quality of Light Diesel Oil. This Light Diesel Oil is widely used in various suitable applications such as in lower RPM engines, etc. Further, we ensure to provide best quality products to clients at reasonable price and satisfy their entire requirements in all manners. These are known for their effective usages. Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. Whereas HSD is used as a fuel for high-speed engines having 750 RPM and above in most of the prime movers used, LDO is used in lower RPM engines. It is used in Lift irrigation pump sets, DG Sets and as a fuel in certain boilers and furnaces. We are leading Supplier of #Light Diesel Oil in #Vadodara, #Ahmedabad, #Surat, GUJARAT, INDIA.
1
false