http://WWW.SHAIKH-PETROLEUM.COM
SHAIKHPETROLEUM 59ba728ff39fac0a1ce8231f False 245 9
OK
background image not found
Found Update results for
'proper temperature'
9
Furnace oil : is a Dark, viscous residual fuel oil which is obtained by blending residual products from various refining processes with suitable diluent usually middle distillates to obtain the required fuel oil grades. These fuel oil grades are similar in nature and have been marketed under different specifications in various countries. In India it is sold under BIS specification IS 1593-1982, Medium Viscosity Grade 2 (MV 2 – 180 cst FO) / High Viscosity Grade (HV – 380 cst FO). Uses of Furnace Oil are: As fuel for Power Generation in DG Sets As fuel for Boilers/ Furnaces/ Air preheater/ Any other Heaters Fuel for Bunkering Fuel/ Feedstock in Fertilizer Plants Furnace oil is a class C product having Flash Point above 66 C. Since this is a residual fuel, there has to be gradual filtration system to prevent the filter choking and fuel nozzles choking. Due to its viscous nature, t has to be heated to improve its flowability and to a proper temperature for proper + atomisation. Normally gear pumps are preferred to avoid cavitation problems. For More Query About Furnce Oil Read Below Texts: Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil (L.D.O.) & Furnace Oil (F.O) C9 C10 & MTO. For Know More Please Vist our Bussiness Mentioned Link: www.indiamart.com/shaikh-petroleum Email :sales@shaikhpetro.com Mobile :9898970097, 9879000006 Have a Happy Friday !!!
Furnace Oil Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil & Furnace Oil C9 C10 & MTO. Brief About Products: Light Diesel Oil Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha. Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates. SPECIFICATION Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. VISCOSITY Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. SAFETY INFORMATION Reactivity Data – Chemically stable and incompatible with strong oxidizers. Does not React vigorously with common materials but can react with oxidizing agents Health Hazard Data – Routes of entry may be through inhalation/ ingestion/ skin/ eye. EFFECTS OF EXPOSURE / SYMPTOMS Ingestion – may cause spontaneous vomiting, irritation of mouth throat and gastro intestinal tract. On prolonged exposure it makes skin dry, erythema oil acne, development of warty growths which may lead to skin cancer, skin cracking and contact dermitites. As it is handled at a high temperature, skin contact could produce burns. On exposure to eye it may cause light to moderate irritation. Ingested – do not induce vomiting as it may lead to chemical pneumonitis. Remove contaminated clothing immediately and wash affected area with water and soap. If eyes are affected, irrigate liberally with copious amounts of water and seek medical advice. Furnace Oil in Surat Furnace Oil Ahmadabad Furnace Oil in Rajkot Furnace Oil in Bhavnagar Furnace Oil in Ankleshwar Furnace Oil Oil in Jamnagar Furnace Oil in Junagadh Furnace Oil in Kutch Furnace Oil Kheda Furnace Oil in Gandhinagar Furnace Oil in Anand Furnace Oil in Morbi Furnace Oil in Mehsana Furnace Oil in Surendranagar Furnace Oil in Bharuch Furnace Oil in Valsad Furnace Oil in Navsari Furnace Oil in Gir Somnath Furnace Oil in Porbandar Furnace Oil in Panchmahal Furnace Oil in Dahod Furnace Oil in Valsad Furnace Oil in Amreli Furnace Oil SHAIKH PETROLEUM is Gujarat's largest manufacturing company into Furnace Oil. We are leading supplier of Furnace Oil in Gujarat, India. Furnace Oil.
Furnace Oil Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil & Furnace Oil C9 C10 & MTO. Brief About Products: Light Diesel Oil Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. Furnace Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkaline, cyclo-alkaline and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil i.e. heavier than gasoline and naphtha. Furnace Oil is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates. SPECIFICATION Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. VISCOSITY Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. SAFETY INFORMATION Reactivity Data – Chemically stable and incompatible with strong oxidizers. Does not React vigorously with common materials but can react with oxidizing agents Health Hazard Data – Routes of entry may be through inhalation/ ingestion/ skin/ eye. EFFECTS OF EXPOSURE / SYMPTOMS Ingestion – may cause spontaneous vomiting, irritation of mouth throat and gastro intestinal tract. On prolonged exposure it makes skin dry, erythema oil acne, development of warty growths which may lead to skin cancer, skin cracking and contact dermitites. As it is handled at a high temperature, skin contact could produce burns. On exposure to eye it may cause light to moderate irritation. Ingested – do not induce vomiting as it may lead to chemical pneumonitis. Remove contaminated clothing immediately and wash affected area with water and soap. If eyes are affected, irrigate liberally with copious amounts of water and seek medical advice. Furnace Oil in Surat Furnace Oil Ahmadabad Furnace Oil in Rajkot Furnace Oil in Bhavnagar Furnace Oil in Ankleshwar Furnace Oil Oil in Jamnagar Furnace Oil in Junagadh Furnace Oil in Kutch Furnace Oil Kheda Furnace Oil in Gandhinagar Furnace Oil in Anand Furnace Oil in Morbi Furnace Oil in Mehsana Furnace Oil in Surendranagar Furnace Oil in Bharuch Furnace Oil in Valsad Furnace Oil in Navsari Furnace Oil in Gir Somnath Furnace Oil in Porbandar Furnace Oil in Panchmahal Furnace Oil in Dahod Furnace Oil in Valsad Furnace Oil in Amreli Furnace Oil SHAIKH PETROLEUM is Gujarat's largest manufacturing company into Furnace Oil. We are leading supplier of Furnace Oil in Gujarat, India. Furnace Oil. For more info visit us at http://shaikh-petroleum.com/bizFloat/59e5916896b7120bac058a83/Furnace-Oil-Shaikh-Petroleum-was-established-in-the-year-1983-under-the-dynamic-leadership-of-Late-Mr-Gulambhai-Shaikh-SHAIKH-Petroleum-established-more-than-two-decades-ago-SHAIKH-PETROLEUM-is-one-of-the-rel
Furnace Oil : Is a residual fuel (motor spirit / gasoline, high speed diesel and kerosene are distillate fuels). It is a dark, viscous liquid at room temperature. It is a complex mix of hydrocarbons with carbon atoms ranging mainly from 20 to 55. It is produced by blending residues from various refinery processing units and diluting with middle distillates. SPECIFICATION Furnace oil in the current marketing range meets Bureau of Indian Standards Specification IS : 1593 – 1982 for fuel oils, grade MV2. VISCOSITY Viscosity is the most important characteristic in the furnace oil specification. It influences the degree of pre-heat required for handling, storage and satisfactory atomization. If the oil is too viscous it may become difficult to pump, burner may be hard to light and operation may be erratic. Poor atomization may result in the carbon deposits on the burner tips or on the walls. The upper viscosity limit for furnace oil is such that it can be handled without heating in the storage tank is excepting under server cold conditions. Pre-heating is necessary for proper atomization. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil (L.D.O.) & Furnace Oil (F.O) C9 C10 & MTO. For Know More Please Vist our Bussiness Mentioned Link: www.indiamart.com/shaikh-petroleum Email :sales@shaikhpetro.com Mobile :9898970097, 9879000006 Have a Happy Day !!!
FURNACE OIL : Furnace oil is a Dark, viscous residual fuel oil which is obtained by blending residual products from various refining processes with suitable diluent usually middle distillates to obtain the required fuel oil grades. These fuel oil grades are similar in nature and have been marketed under different specifications in various countries. In India it is sold under BIS specification IS 1593-1982, Medium Viscosity Grade 2 (MV 2 – 180 cst FO) / High Viscosity Grade (HV – 380 cst FO). There has to be gradual filtration system to prevent the filter choking and fuel nozzles choking. Due to its viscous nature, it has to be heated to improve its flowability and to a proper temperature for proper atomisation. Normally gear pumps are preferred to avoid cavitation problems. We Offers Quality Proven Range of Furnace Oil At Best Price Guaranteed Order Now. On Time Delivery. 100% Client Satisfaction. Top Quality Products. Types: Light Diesel Oil, Diesel Oil, Aromatic Solvent, Aromatic Solvent C9 A, Aromatic Solvent C9 B. For More Query About Furnace Oil Read below Texts : Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil (L.D.O.) & Furnace Oil (F.O) C9 C10 & MTO. For Bussiness Query Please Vist our Bussiness Mentioned Link: www.indiamart.com/shaikh-petroleum. Email :sales@shaikhpetro.com Mobile : 9898970097, 9879000006
Furnace Oil Furnace oil is a dark colored fuel, either distilled or residual fraction of crude oil that is extracted while petroleum distillation and is used for the purpose of generation heat and power. This fuel is sticky, thick and glutinous in nature. Furnace oil is known by the name of fuel oil internationally and also as bunker fuel. The fuel oil consists of lengthy chains of hydrogen and carbon mainly alkanes, cycloalkanes and aromatics. Basically furnace oil is termed for relatively heavier commercial extracts from crude oil. Furnace oil is largely an industrial fuel. It acts as a key ingredient in the generation of electricity and heat in a number of production units. It has been used since a long time for such purposes and has gained much importance and inevitable value. In India it is sold under BIS specification under IS 1593-1982, Medium Grade 2. Uses of Furnace Oil:  As fuel for Power Generation in DG Sets As fuel for Boilers/ Furnaces/ Air preheater/ Any other Heaters As fuel for Bunkering As fuel/ Feedstock in Fertilizer Plants As a contribution towards environmental hazard awareness, we supply Furnace Oil with very low sulphur content. Advantages:  Low sulphur fuels will emit lesser quantity of sulphur dioxide and thus cause minimal environmental pollution. Low sulphur fuels will not cause corrosion effect on the equipments used, at low and high temperatures, thus increasing the life expectance of such equipments.
Things You Must Know About MTO ! It is commonly used as a paint thinner for oil-based paint and cleaning brushes, and as an organic solvent in other applications. Mineral turpentine is chemically very different from turpentine, which mainly consists of pinene, and it has inferior solvent properties. Paint thinner and turpentine are both solvents. Both can be used to thin oil paint to effect the flow of paint onto the canvas. Commercially, the term "paint thinner" is rather broad, and can cover many different solvents like mineral spirits, naptha, even turpentine. Mineral turpentine oil is distilled from petroleum which is a clear liquid known by the names petroleum spirit, solvent naphtha and mineral turpentine.We Are wholesale dealer in India for Mineral Turpentine Oil Also Available In Large Quantities ! The major Mineral Turpentine Oil Uses are:- Paints & Varnishes Dry cleaning Industrial cleaning Thinner Resins Household insecticide Printing Blending oil More Query About MTO Read below Texts : Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil (L.D.O.) & Furnace Oil (F.O) C9 C10 & MTO. For Know More Please Vist our Bussiness Mentioned Link: www.indiamart.com/shaikh-petroleum Email :sales@shaikhpetro.com Mobile : 9898970097, 9879000006
LIGHT DIESEL OIL : Light Diesel Oil falls under class C category fuel having flash point above 66OC. It is a blend of distillate components and a small amount of residual components. It is marketed under BIS 1460-2000 specification for Diesel fuels. It is marketed under BIS 1460-2000 specification for Diesel fuels. Whereas HSD is used as a fuel for high-speed engines having 750 RPM and above in most of the prime movers used, LDO is used in lower RPM engines. It is used in Lift irrigation pump sets, DG Sets and as a fuel in certain boilers and furnaces. Below is The Specification For LDO(Light Diesel Oil) : No. PROPERTY LDO 1 Density @ 15`C 0.88 to 0.9 2 Sulphur Content % wt. 0.3 3 Flash Point 78`C 4 Water Content % 0.05 For More Query About Light Diesel Oil Read below Texts : Shaikh Petroleum was established in the year 1983 under the dynamic leadership of Late Mr. Gulambhai Shaikh. SHAIKH Petroleum established more than two decades ago. “SHAIKH PETROLEUM” is one of the reliable names in the Oil & Petroleum Market in Bharuch Dist. Shaikh Petroleum is wholesale & Retail Suppliers of Light Diesel Oil (L.D.O.) & Furnace Oil (F.O) C9 C10 & MTO. For Bussiness Query Please Vist our Bussiness Mentioned Link: www.indiamart.com/shaikh-petroleum. Email :sales@shaikhpetro.com Mobile : 9898970097, 9879000006 | LDO IN ANKLESHWAR & BHARUCH |
Furnace Oil Concept & Uses : Furnace oil (also known as heavy oil, marine fuel or furnace oil) is a fraction obtained from petroleum distillation, either as a distillate or a residue. In general terms, fuel oil is any liquid fuel that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 42 °C (108 °F) and oils burned in cotton or wool-wick burners. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, i.e., heavier than gasoline and naphtha. Small molecules like those in propane, naphtha, gasoline for cars, and jet fuel have relatively low boiling points, and they are removed at the start of the fractional distillation process. Heavier petroleum products like Diesel and lubricating oil are much less volatile and distill out more slowly, while bunker oil is literally the bottom of the barrel; in oil distilling, the only things more dense than bunker fuel are carbon black feedstock and bituminous residue (asphalt), which is used for paving roads and sealing roofs. A furnace is a device used for high-temperature heating. The name derives from Latin word fornax, which means oven. The heat energy to fuel a furnace may be supplied directly by fuel combustion, by electricity such as the electric arc furnace, or through induction heating in induction furnaces. For Know More about furnace oil Read Below Texts : Shaikh Petroleum, Ankleshwar. Vahid Shaikh 9879000006, 9898970097 Website: http://shaikh-petroleum.com Email: shaikhpetroleum@gmail.com Address: Shaikh Petroleuum, 11, 12, 13, Near Valia Crosing, Old Colony, G.I.D C Online Addres Location: http://maps.google.com/maps?q=loc:21.6168
1
false